Header Ads

How To Switch The Modes Of Eleaf iKuun i80 Kit

The Eleaf iKuun i80 kit has different vaping modes. You may not know how to switch the modes if you are a starter. Now, follow me!


Switch vaping modes: press the fire button 3 times in quick succession to enter into the mode options. Then press “+” button to switch between VW/TEMP (Ni, Ti, SS316) / TCR (M1, M2, M3) modes. Press the fire button once to confirm. In TEMP / TCR mode, while it is flashing, press “-” button to enter into its subsidiary menu. Then press “+” button to choose among: Ni / Ti / SS316 (TEMP mode) or M1/ M2/ M3 (TCR mode). Press the fire button to confirm.

1)VW Mode:
When set in VW mode, the device can support a coil whose resistance is within the range of 0.1ohm - 3.5ohm.
Adjust wattage: in this mode, the output wattage can be adjusted from 1W to 200W by pressing “+” button or “-” button, “+” button to increase and “-” button to decrease. Long press “+” or “-” button can rapidly increase or decrease the wattage level.

2) TEMP (Ni, Ti, SS316)/ TCR (M1, M2, M3) Mode:
When set in TEMP (Ni, Ti, SS316) mode, the device can separately support Nickel 200, Titanium, and Stainless Steel 316 coils. In TCR (Temperature Coefficient of Resistance) mode, the device can support different temperature control coils within different TCR value ranges and you can set the TCR at different values within proper range. (Resistance range of coil: 0.05ohm - 1.5ohm)

3)The Setting of TCR (M1, M2, M3) Mode: 
When the device is powered off, keep pressing the fire button and the “+” button simultaneously, then you will enter into the TCR (M1, M2, M3) set menu:
1. Press the “+” or “-” button to choose among M1, M2 and M3 modes;
2.Press the fire button once to TCR value setting, and then press “+” or “-” button to increase or decrease the TCR value according to the material of the coil you use;
3.Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting.

No comments

Powered by Blogger.